Killer Klown popcorn ray gun

 

 

 

How to build a Killer Klown ray gun

I am a huge fan of Killer Klown from outer space. ive always wanted to get some of the movie props that have been listed on ebay, but honestly the prices for some of the stuff is outrageous! After look closely to the design ( and there are a few artist sketched mockups to serve as guides) I knew I could build one for myself.

Update:  i couldn’t find my pics of the original build. But i had some leftover parts and will start this tutorial:

parts

All of the wood parts were purchased at Hobby Lobby but im sure most Craft stores will carry something similar. The two PVC adapters I got at Home Depot (1″ for the larger one and 1/2″ on the smaller one. I got them in the plumbing section ). I drilled a 1/4″ hole in almost everything here specifically for the dowel that will serve as the support for the rest of the items.

parts2

Once the holes are completed just start sliding the parts in. I didnt glue any of these parts, but if your drill hole is a little big, you may want to fasten them down so they don’t move as much.

parts3

Continue sliding the rest of the parts so that You can see what it will look like, but more importantly, so you can make any adjustments before the paint job.

parts4

The wheel will take a little time if you pay close attention to detail the way I like to.

Quick and easy: just super glue the small wood dots to the outer edge of the wheel and eyeball the spacing.

Detailed:  Grab a powered sander and gently press each ball slightly into the sandpaper that will form a small flat surface. Once you apply the glue, it will adhere to the wheel with better strength. I used a ruler and evenly spaced all 8 of the dots that I used. Using a similar pattern to this: (feel free to draw all you want on it, youre gonna paint it!)

Screen Shot 2014-05-09 at 11.06.02 PM

parts6

more on the way…

 

 

 

IMG_0280 IMG_0278 IMG_0275

IMG_3140 IMG_3149 IMG_3150

 

 

20 comments

  • Brandy Marshall  

    Can I get step by step instructions on how to make it? My daughter wants a Killer Klowns from Outer Space birthday party and I’m trying to custom make most of it and I’m a little stressed out. If I could make this myself it would be a huge relief.

    • ahourigan  

      You have an awesome daughter! Yes, let me look for the pictures that I took. I bought most of the items at Hobby Lobby and the rest at home depot. Let me go through my archives and see if I can get this tutorial going.

      • Brandy Marshall  

        OMG thank you so much!!! You are my favorite person right now. Yes I like to think she is pretty spectacular, thank you for complimenting her. Also thank you for making an awesome replica and taking the time to show me how to do it myself.

  • Luke  

    could i buy one from you for $15, I am a huge fan of Klowns, and I am making a remake of the film, right now I am rounding up props, give me a buzz, thanks!

    • ahourigan  

      I make them but usually sell them for closer to 40. :) I get more for them on ebay and list them every now and again.

      • Deathdealer187  

        Please sell me some killer klown guns on ebay ill buy them asap just let me know when there posted i need for halloween

      • Brandon Seidenspinner  

        Do you still make and sell these?

        • ahourigan  

          It’s been a while but it can be done.

  • Luke  

    $25?, i really need this. PLEASE IM BEGGING LOL, and thanks for replying quickly

  • Justin  

    What did you use for the gun handle? Plan on making one for my Halloween costume this year

    • ahourigan  

      I went to hobby lobby and purchased one of those mdf material letters (like for addresses). I bought the letter Q and cut it with a jigsaw. :)

      • Deathdealer187  

        I want to buy these guns from you can you post me a popcorn gun ebay link and a cotton candy ray gun link please i need them for halloween for my fatso clown costume

        • ahourigan  

          I dont have any available at the moment, but perhaps can make a few. Ill post on here if I get to build a few. Thanks for stopping by!

  • Aaron  

    If you have a picture of all possible parts I would really appreciate it , I bought the small green clowns suit two years ago and this would make everything legit , email me an attachment if you can please

  • umanda floyd  

    Do you sell them on amazon? Me and my son enjoy the killer klown from outer space movie. It my son favorite movie. Do you only sell them on ebay. I’m going to have to buy the shorty costume separte. It going cost me about 200.00. They don’t sell the costume together. I like to buy a gun for my son costume when I get it for next year halloween.

  • Mary  

    Do you happen to still make these to sell? Could really use one for my kid for Halloween!!

    • ahourigan  

      I do make them from time to time, by when were you needing it?

      • Deathdealer187  

        Still no new pictures of your knew klown guns ? Where are they ?

  • Deathdealer187  

    Heres a idea gimme a way to contack u so i can buy one from u paypal invoice to avoid ebay then u can avoid ebay fees as well or post on figure realm thanks

Leave a Reply to Brandy Marshall Cancel reply

Your email address will not be published. Required fields are marked *